https://aluminumbatterybox.com Mon, 27 Apr 2026 14:20:45 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-5/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-5/#comments Wed, 22 Apr 2026 02:07:46 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-5/

















Aluminum battery box, Complies with NHRA, Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications, Includes 10 feet of black and red wire. Black and red terminal covers. Battery ends and terminals. Car Battery Relocation Kit w/Taylor Aluminum Box w/Batt Disc. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. This external jump start block provides easy access when reaching the battery is difficult or space is limited. Provides connection on outside of vehicle when battery is not readily accessible or when reaching to battery space becomes dangerous or difficult. Can be utilized for fast jump start such as in racing industry. Conductor posts are mounted on insulated strip with polarity colored protective caps. Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. 180 amp continuous, 1000 amp instantaneous. Fits panel through 3/16 thick. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. (1) American Autowire 500931 External Battery Terminal Block. (1) Speedway Two-Post Battery Disconnect Isolation Kill Switch. By dogman on April 19, 2024. Used this my 47 chevy convertible, great design and clean looking. Yes, I recommend this product. By 39 Chevy on September 08, 2023. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 74 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-5/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-4/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-4/#comments Sat, 08 Nov 2025 20:42:43 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-4/













Aluminum battery box, Fits most battery sizes, Includes 10 feet of black and red wire, Battery ends and terminals, Black and red terminal covers. Car Battery Relocation Kit w/Taylor Aluminum Box. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. Shown for photo reference only. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-4/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-4/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-4/#comments Wed, 12 Mar 2025 09:53:01 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-4/

















Aluminum battery box, Complies with NHRA, Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications, Includes 10 feet of black and red wire. Black and red terminal covers. Battery ends and terminals. Car Battery Relocation Kit w/Taylor Aluminum Box w/Batt Disc. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. This external jump start block provides easy access when reaching the battery is difficult or space is limited. Provides connection on outside of vehicle when battery is not readily accessible or when reaching to battery space becomes dangerous or difficult. Can be utilized for fast jump start such as in racing industry. Conductor posts are mounted on insulated strip with polarity colored protective caps. Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. 180 amp continuous, 1000 amp instantaneous. Fits panel through 3/16 thick. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. (1) American Autowire 500931 External Battery Terminal Block. (1) Speedway Two-Post Battery Disconnect Isolation Kill Switch. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-4/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-3/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-3/#comments Sat, 19 Oct 2024 01:02:55 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-3/













Aluminum battery box, Fits most battery sizes, Includes 10 feet of black and red wire, Battery ends and terminals, Black and red terminal covers. Car Battery Relocation Kit w/Taylor Aluminum Box. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. Shown for photo reference only. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-3/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-3/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-3/#comments Fri, 18 Oct 2024 01:00:47 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-3/

















Aluminum battery box, Complies with NHRA, Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications, Includes 10 feet of black and red wire. Black and red terminal covers. Battery ends and terminals. Car Battery Relocation Kit w/Taylor Aluminum Box w/Batt Disc. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. This external jump start block provides easy access when reaching the battery is difficult or space is limited. Provides connection on outside of vehicle when battery is not readily accessible or when reaching to battery space becomes dangerous or difficult. Can be utilized for fast jump start such as in racing industry. Conductor posts are mounted on insulated strip with polarity colored protective caps. Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. 180 amp continuous, 1000 amp instantaneous. Fits panel through 3/16 thick. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. (1) American Autowire 500931 External Battery Terminal Block. (1) Speedway Two-Post Battery Disconnect Isolation Kill Switch. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-3/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-2/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-2/#comments Mon, 17 Jun 2024 01:48:32 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-2/

















Aluminum battery box, Complies with NHRA, Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications, Includes 10 feet of black and red wire. Black and red terminal covers. Battery ends and terminals. Car Battery Relocation Kit w/Taylor Aluminum Box w/Batt Disc. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. This external jump start block provides easy access when reaching the battery is difficult or space is limited. Provides connection on outside of vehicle when battery is not readily accessible or when reaching to battery space becomes dangerous or difficult. Can be utilized for fast jump start such as in racing industry. Conductor posts are mounted on insulated strip with polarity colored protective caps. Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. 180 amp continuous, 1000 amp instantaneous. Fits panel through 3/16 thick. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. (1) American Autowire 500931 External Battery Terminal Block. (1) Speedway Two-Post Battery Disconnect Isolation Kill Switch. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc-2/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-2/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-2/#comments Mon, 10 Jun 2024 00:52:28 +0000 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-2/













Aluminum battery box, Fits most battery sizes, Includes 10 feet of black and red wire, Battery ends and terminals, Black and red terminal covers. Car Battery Relocation Kit w/Taylor Aluminum Box. Aluminum Battery Box – 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. Shown for photo reference only. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 72 years.

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-2/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box/#comments Thu, 14 Oct 2021 21:30:17 +0000 http://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box/













Aluminum battery box, Fits most battery sizes, Includes 10 feet of black and red wire, Battery ends and terminals, Black and red terminal covers. Car Battery Relocation Kit w/Taylor Aluminum Box. Aluminum Battery Box 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. Shown for photo reference only. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Car Battery Relocation Kit withTaylor Aluminum Box” is in sale since Tuesday, September 7, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Battery Accessories”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States.

• Brand: Speedway Motors
• Type: Battery Boxes & Hardware
• Manufacturer Part Number: 9100328
• California Prop 65 Warning: False

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box/feed/ 0 https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc/ https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc/#comments Mon, 27 Sep 2021 17:04:14 +0000 http://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc/













Aluminum battery box, Complies with NHRA, Kill switch for safety and theft protection, Works great for cars, trucks, RV, or marine applications, Includes 10 feet of black and red wire. Black and red terminal covers. Battery ends and terminals. Car Battery Relocation Kit w/Taylor Aluminum Box w/Batt Disc. Aluminum Battery Box 100 Series. Complies with NHRA Rule 8:1. Required by NHRA when there is no firewall between driver’s compartment and battery. Fits most battery sizes. Embossed Taylor logo in lid. 040 aluminum box design allows access without removing the battery from the box. Hard mounts battery to the frame with supplied 3/8 bolts. Heavy duty one-piece welded battery hold down and mounting hardware included. Dimensions: 13.5″ long x 9.5″ wide x 10 high. This external jump start block provides easy access when reaching the battery is difficult or space is limited. Provides connection on outside of vehicle when battery is not readily accessible or when reaching to battery space becomes dangerous or difficult. Can be utilized for fast jump start such as in racing industry. Conductor posts are mounted on insulated strip with polarity colored protective caps. Remote battery disconnect switch for safety and theft protection. A battery kill switch is required for use with alternators by the NHRA. Battery shut off switch can be remote mounted or where specified for saftey and convenience. 180 amp continuous, 1000 amp instantaneous. Fits panel through 3/16 thick. (1) Taylor 48100 Aluminum Battery Box, 13.5 x 9.5 Inch. (1) Taylor 21405 Top Post Battery Cable Terminal End Kit, 2 Pack. (1) Longacre® 52-45660 Battery cable ends (pair). (1) Red Battery Cable, 10 Foot, 2ga. (1) Black Battery Cable, 10 Foot, 2ga. (1) Black Battery Terminal Protector Cover. (1) Red Battery Terminal Protector Cover. (1) American Autowire 500931 External Battery Terminal Block. (1) Speedway Two-Post Battery Disconnect Isolation Kill Switch. Please take advantage of the add to cart button on each listing to get everything in your cart prior to completing checkout. Speedway Motors is Americas Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. Speedway accepts full responsibility for the accuracy of our listings and product representation. The item “Car Battery Relocation Kit withTaylor Aluminum Box withBatt Disc” is in sale since Wednesday, September 8, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Charging & Starting Systems\Battery Trays”. The seller is “speedway_motors” and is located in Lincoln, Nebraska. This item can be shipped to United States.

• Brand: Speedway Motors
• Manufacturer Part Number: 9100333
• Type: Battery Boxes & Hardware
• California Prop 65 Warning: False

]]> https://aluminumbatterybox.com/car-battery-relocation-kit-withtaylor-aluminum-box-withbatt-disc/feed/ 0