https://aluminumbatterybox.com Mon, 06 Apr 2026 01:33:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://aluminumbatterybox.com/geometry-3478-optima-billet-battery-hold-down-tray-bracket-box-hot-rod/ https://aluminumbatterybox.com/geometry-3478-optima-billet-battery-hold-down-tray-bracket-box-hot-rod/#comments Sun, 25 Feb 2024 15:29:05 +0000 https://aluminumbatterybox.com/geometry-3478-optima-billet-battery-hold-down-tray-bracket-box-hot-rod/




WCM products are made in the U S A!! A flat black Vinyl cover that goes over your battery to better show off your awesome new tray!! All of the pieces of this tray have been CNC machined out of 1/2″ and 3/8″ thick 6061 T6 aircraft quality billet aluminum, not weaker cast aluminum that others may use. The top measures 7.42 inches x 11.15 inches, you will need 1/2 inch clearance around the battery for the tray to fit. All of the mounting hardware and the hardware to bolt this box together, are included, and are stainless steel. The top and the bottom are both recessed with a deep. 200 pocket to hold the battery better, and each side has two 1/4 bolts on the top and on the bottom to make sure the battery stays were you put it. This battery box has a brushed finish. We have 4 3/8 holes on the bottom of the tray that line up to recesses in the bottom of the battery. This is very handy because if you need an abnormally long bolt to go through a frame ect. Any common hex head bolt will work with our tray. As you can see the top has a classic geometry design, and the bottom has the WCM logo of Wieland Custom Machine. PLEASE NOTE THIS TRAY ONLY FITS THE 34/78 SERIES OPTIMA BATTERY. IF YOU HAVE QUESTIONS PLEASE ASK.

]]> https://aluminumbatterybox.com/geometry-3478-optima-billet-battery-hold-down-tray-bracket-box-hot-rod/feed/ 0 https://aluminumbatterybox.com/7525-35-geometry-optima-battery-hold-down-bracket-tray-box-moparfordchevy/ https://aluminumbatterybox.com/7525-35-geometry-optima-battery-hold-down-bracket-tray-box-moparfordchevy/#comments Mon, 06 Jun 2022 00:11:05 +0000 https://aluminumbatterybox.com/7525-35-geometry-optima-battery-hold-down-bracket-tray-box-moparfordchevy/



WCM products are made in the U S A!! This is our new line of optima hold downs featuring this new heavy duty Spider design. The top measures 10.5 inches x 7.125 inches, you will need 1/2 inch clearance around the battery for the tray to fit. All of the pieces of this tray have been CNC machined out of 1/2″ and 3/8″ thick 6061 T6 aircraft quality billet aluminum. All of the mounting hardware and the hardware to bolt this box together, are included, and are stainless steel. The top and the bottom are both recessed to hold the battery better, and each side has 2 1/4 bolts on the top and on the bottom to make sure the battery stays were you put it. The bottom bolts line up to recesses in the battery so if you need odd hardware to go through something thick almost anything will work with our tray, hex head, cap screw ect. Way nicer then some sellers that have to use taper head bolts only. This battery box has a heavy brushed finish. As you can see the top has the awesome design, and the bottom has the WCM logo of Wieland Custom Machine. PLEASE NOTE THIS TRAY ONLY FITS THE. 75/35, 75/25 and 35. IF YOU HAVE QUESTIONS PLEASE ASK. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Battery Accessories”. The seller is “guyincognito2″ and is located in this country: US. This item can be shipped worldwide.

• Brand: WCM
• Manufacturer Part Number: 00014
• Finish: Heavy brush
• Manufacturer Warranty: Yes
• Country/Region of Manufacture: United States
• Country of Manufacture: United States
• Part Brand: WCM
• WCM: aluminum

]]> https://aluminumbatterybox.com/7525-35-geometry-optima-battery-hold-down-bracket-tray-box-moparfordchevy/feed/ 0 https://aluminumbatterybox.com/7535-25-geometry-billet-optima-battery-hold-down-bracket-tray-box-billet-6061/ https://aluminumbatterybox.com/7535-25-geometry-billet-optima-battery-hold-down-bracket-tray-box-billet-6061/#comments Fri, 29 Apr 2022 10:04:19 +0000 https://aluminumbatterybox.com/7535-25-geometry-billet-optima-battery-hold-down-bracket-tray-box-billet-6061/



WCM products are made in the U S A!! This is our new line of optima hold downs featuring this new heavy duty Spider design. The top measures 10.5 inches x 7.125 inches, you will need 1/2 inch clearance around the battery for the tray to fit. All of the pieces of this tray have been CNC machined out of 1/2″ and 3/8″ thick 6061 T6 aircraft quality billet aluminum. All of the mounting hardware and the hardware to bolt this box together, are included, and are stainless steel. The top and the bottom are both recessed to hold the battery better, and each side has 2 1/4 bolts on the top and on the bottom to make sure the battery stays were you put it. The bottom bolts line up to recesses in the battery so if you need odd hardware to go through something thick almost anything will work with our tray, hex head, cap screw ect. Way nicer then some sellers that have to use taper head bolts only. This battery box has a heavy brushed finish. As you can see the top has the awesome design, and the bottom has the WCM logo of Wieland Custom Machine. PLEASE NOTE THIS TRAY ONLY FITS THE. 75/35, 75/25 and 35. IF YOU HAVE QUESTIONS PLEASE ASK. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Starters, Alternators, ECUs & Wiring\Battery Accessories”. The seller is “guyincognito2″ and is located in this country: US. This item can be shipped worldwide.

• Brand: WCM
• Manufacturer Part Number: 00014
• Finish: Heavy brush
• Manufacturer Warranty: Yes
• Country/Region of Manufacture: United States
• Country of Manufacture: United States
• Part Brand: WCM
• WCM: aluminum

]]> https://aluminumbatterybox.com/7535-25-geometry-billet-optima-battery-hold-down-bracket-tray-box-billet-6061/feed/ 0